GPR - 1 is specifically formulated to remove graffiti from surfaces previously protected with Graffiti-Pruf sacrificial graffiti barrier. It is safe, easy to use and will not harm the environment.

GPR - 1 is intended to be used in areas where pressurized hot water sprayers cannot be used or are impractical.

GPR - 1 is easily applied with trigger sprayer, sponge or brush. The product is most effective on smooth or medium textured surfaces.

GPR - 1 can be used to remove large areas of graffiti  where hot water is not available.

GPR - 1 is non-flammable, non-toxic, and biodegradable.

It is available in bulk or safe aerosol packages. It complies  with all known FDA and CARB standards.

GRAFFITI SYSTEM

1. Shake well before using.

2. Apply to coated, vandalized areas with sponge,  spray, brush or roller.

3. Allow to work for 1 to 3 minutes. Use a bristle brush on textured surfaces to most effectively lift the graffiti from the surface. Use a soft brush on smooth surfaces.

4. Rinse thoroughly with water.

5. Repeat on stubborn areas.

6. Re-apply Graffiti-Pruf .

WARNING

KEEP OUT OF THE REACH OF CHILDREN

DO NOT TAKE INTERNALLY

AVOID CONTACT WITH EYES

CAUTION

Use with adequate ventilation. Do not swallow.. Avoid contact with eyes. Avoid prolonged or repeated contact with skin. Wash thoroughly after handling.

FIRST AID

INHALATION: Remove to fresh air. Consult physician immediately if breathing is difficult and give artificial respiration.

EYE CONTACT: Flush with water for 15 minutes and get medical care. Remove contact lenses if worn.

SKIN CONTACT: Wash skin with soap and water. Remove contaminated clothing.

INGESTION: Drink large amounts of water. DO NOT INDUCE VOMITING. If vomiting occurs, give lots of water again. Keep head below hips to prevent aspiration of liquid into lungs. Get medical attention immediately.

FIRE * SPILL * LEAK